Vortex Copperhead vs Crossfire – Which Riflescope Stands Out?

0
5
Vortex Copperhead vs Crossfire

As hunting season gets closer with every passing month, we’re rushing through our checklist to see that we don’t leave out any important item. However, we are still undecided on which riflescope stands out between the Vortex Copperhead and the Crossfire. 

My grandfather introduced my brother and me to deer hunting when we were in our teenage years. The first memories we have of hunting are not anything to write home about since we could never catch a dear before it sprinted off into the bushes.

My grandfather, however, had an eye for them and he taught us all the tricks of the trade. Now, we are well into our 50s and we have never missed a hunting season.

I have had my Beanfield Remington Sendero for over a decade now and my brother has not left his Classic Marlin 336C for close to two decades. Our rifles are dependable and to spruce them up, we love to pair them with different scopes every year.

What are the differences between Vortex Copperhead vs Crossfire?

Model
Vortex Copperhead
Vortex Crossfire
Reticle
Dead-Hold BDC
Dead-Hold BDC / V-Plex
Magnification
4-12x
2-7x
Objective Lens Diameter
44mm
32mm
Eye Relief
4.0 inches
3.9 inches
Field of View
24.7-8.4 feet/ 100 yards
4.2-12.6 feet/ 100 yards
Weight
15.8 ounces
14.3 ounces
Length
13.5 inches
10.7 inches
Availability

Vortex Copperhead vs Crossfire -How do they compare?

Turrets

On the Crossfire, the turrets have one option indicating 1 click equals ¼ MOA. The turret feels good to rotate but the clicks are a bit softer and not quite responsive. It has some good resistance so it cannot be accidentally turned.

The Copperhead eyepiece has nice glass that is finely threaded and has a lock which minimizes the amount of play in it. The power ring turns very smoothly. Being a hunting scope, the turrets are capped that move a ¼ inch at 100 yards per click. They can be re-zeroed and can be moved with your fingers. They are quite mushy and predictable which holds zero quite well.

Turrets on Copperhead a tad bit more responsive and can be manipulated by hand as compared to those found on the Crossfire model.

Reticle 

Crossfire has a bullet drop compensation reticle featuring crosshairs and tick marks on all sides, top, and bottom with the bottom extending further down. This is very useful in cases when you are firing into further ranges because you will not have to spin your turrets that much as it holds zero.

Dead-Hold BDC is ideal for minimizes guesswork in hold-over and windage correction making them perfect for hunting and shooting at varying ranges.

Copperhead’s reticle is better than Crossfire regardless of their Bullet Drop Compensation capabilities because they hold zero perfectly and minimize error in aim regardless of the shooting range. 

Optic Lenses

The Crossfire has a simple ring with good gnarling on it which turns easily and nicely from behind the gun with no need to get up or put some weight on it. However, it will be a little difficult to determine where you are at magnification-wise.

The Copperhead reticle is a Dead-Hold BDC with fully coated lenses and anti-reflective coatings on all air-to-glass surfaces. It is waterproof and made of aircraft-grade aluminum that is fatigue-resistant.

The tube is also purged with Nitrogen for fog proof capabilities and to secure their shock-proof status, the eyepiece is securely locked in place, fore and aft with machine locking rings. This keeps them in alignment and helps them withstand recoil and impact.

Both the Copperhead and Crossfire offer users dependable and durable features that are Nitrogen-gas treated, fully-coated, and spot an anodized-aluminum frame that is strong enough to withstand most calibers. 

Performance 

They have good focus rings on the back that are easy to actuate with the Copperhead being a little bit more positive and easier to turn compared to the Crossfire. Owing to its larger objective lens, the Copperhead has more light gathering capabilities compared to Crossfire. 

They both gather light in the darkness to a reasonable degree, and they easily identify and track a target. However, the Copperhead does have a bigger objective lens in diameter with a 12mm difference compared to the Crossfire scope.

Eye relief between these two Vortex models is not so different because the Crossfire gives 3.8 inches and the Copperhead offers 4.0 inches of eye-relief. 

Vortex Copperhead vs Crossfire – A Comparison Overview 

Vortex Copperhead Review 

Vortex Optics Copperhead 4-12x44 Second Focal Plane Riflescope - Dead-Hold BDC Reticle
  • Specifically designed for hunters and shooters, the Copperhead riflescope offers the highest levels of...
  • The Dead-Hold BDC is good for hunting and shooting at varying ranges where estimating hold-over is a...
  • Fully multi-coated lenses increase light transmission with multiple anti-reflective coatings on all...
  • The long eye relief, locking diopter are just a few of the reasons this riflescope is a crowd pleasing...

The eyepiece has nice glass that I finely threaded and has a lock which minimizes the amount of play in it. The power ring turns very smoothly. Being a hunting scope, the turrets are capped that move a ¼ inch at 100 yards per click. They can be re-zeroed and can be moved with your fingers. They are quite mushy and predictable which holds zero quite well.

The reticle type is a Dead-Hold BDC with fully coated lenses and anti-reflective coatings on all air-to-glass surfaces. It is waterproof and made of aircraft-grade aluminum that is fatigue-resistant. The tube is also purged with Nitrogen for fog proof capabilities and to secure their shock-proof status, the eyepiece is securely locked in place, fore and aft with machine locking rings. This keeps them in alignment and helps them withstand recoil and impact

Pros

  • Bright, clear and accurate imagery
  • Capped, finger-set turrets
  • Long eye relief
  • Durable

Cons

  • Minor glare issues
  • Limited performance in low-light

View Price on Amazon

Vortex Crossfire Review 

Vortex Optics Crossfire II 2-7x32 Scout, Second Focal Plane, 1-inch Tube Riflescope - V-Plex Reticle
  • The 2-7x32 Crossfire II Scout Riflescope is perfect for Use on your Scout rifle, The V-Plex reticle is a...
  • With 9. 45" of eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture...
  • Anti-reflective, fully multi-coated lenses provide bright and clear views for the user
  • Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in

Vortex Crossfire offers you 2-7x magnification on a 32mm objective lens. It weighs 14.3ounces and is made in black featuring a fixed parallax at 100 meters good for medium and close-range hunting. At the highest magnification, the field of view is 4.2 feet and at the lowest, it is 12.6 feet at 100 yards.

Eyer relief offered is long-standing at 3.9 inches with a tunnel effect that stays the same with different magnification. This rifle scope is shockproof up to 308 mm win caliber and is purged with Nitrogen and it also delivers great fog and waterproof performance.

Pros

  • Long eye relief
  • Small in size for compact hunting rifles
  • Good build quality

Cons

  • Field of view could be made bigger

View Price on Amazon

Conclusion 

Both being Vortex scopes, they guarantee a reliable hold on zero despite any changes in magnification.

While the Copperhead features a larger objective lens and it produces clear imagery, it comes with some glare issues especially in bright light and it offers limited performance even in low light conditions.

Crossfire, on the other hand, is more compact and offers favorable eye relief. However, the field of view is quite limited which long-range shooters like myself will not appreciate.

Final Verdict: So, which is better? Vortex Copperhead or Crossfire?

Overall, the Vortex Copperheadis better than Crossfire because it provides a larger field of view, more power in magnification, and eyepiece locking mechanism. This is perfect for long-range shooters who need a keen scope while out in the hunting range.

FAQ

Does the Vortex Copperhead come with zero stops?

No, it doesn’t have zero stops. However, you can unscrew the top of the turret, lift the scope and set the dial to zero once you are sighted in.

I own an AirForce Condor SS PCP Air Rifle. Will it work well with this Crossfire scope?

Yes, it will. All you need is to buy the 11mm dovetail mount and pair it with 1” scope rings of medium height. It should work perfectly.

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here